User Guide

OmniAccess SafeGuard Controller Installation Guide
26
Chapter 2: Site Preparation and Installation
Four-Post Rack
To install the SafeGuard Controller in a four-post rack, follow these steps:
1 Lift the controller carefully from the packing material, and set it on a level work
surface.
2 Using the screws from the mounting accessory kit, attach the rack-mounting
brackets, as shown in Figure 7.
Figure 7 Attaching the Rack-Mounting Brackets at the Front
3 Slide the controller into the rack, and align the mounting holes.
4 Using screws appropriate to the equipment rack, attach the brackets to the rack, as
shown in Figure 8.
CST_005