User Guide

OmniAccess SafeGuard Controller Installation Guide
20
Chapter 1: Overview of the SafeGuard Controller
Ta ble 4 describes the meanings of the system and port mode LEDs; Tabl e 5 describes the
meanings of the port LEDs.
Table 4 System and Port Mode LEDs
Label Color Meaning
Power1 Green Lights when power supply 1 is on.
Power2 Green Lights when power supply 2 is on.
Alarm Amber Lights when an alarm condition exists.
Speed Green Lights when the upper port LED indicates operating speed:
10, 100, or 1000 Mbps.
Duplex Green Lights when the upper port LED indicates port duplex
mode: full-duplex or half-duplex.
Status Green Lights when the upper port LED indicates port protection
mode: monitor, pass-through, or protect.
Table 5 Port LEDs
LED Position Mode or Type Function Color and Meaning
Upper Speed Port operating speed Off: 10 Mbps
Green: 100 Mbps
Amber: 1000 Mbps
Duplex Port duplex mode Off: Link down
Amber: Half-duplex
Green: Full-duplex
Blinking: Collision
Status Port protection mode Off: Pass-through
Amber: Monitor
Green: Protect
Lower Link Port link status Off: Link down
Green: Link up
Blinking: Tx or Rx activity