User Guide

OmniAccess SafeGuard OS Administration Guide
69
Chapter 2: Accessing and Managing the System
■ Configuring SNMP Communities
■ Configuring a SNMP Target
■ Enabling and Disabling SNMP Traps
■ Displaying SNMP Community Information
■ Displaying SNMP Target Information
■ Displaying SNMP System Information
Setting the SNMP Name
To set the SNMP name of the device, use the snmp-server sysinfo name command. The
syntax for the Global Configuration command is:
snmp-server sysinfo name name
The following example sets the SNMP name for a device to bridge OmniAccess 2400
SafeGuard:
(SafeGuardOS) # configure terminal
(SafeGuardOS) (config) # snmp-server sysinfo name bridgeOmniAccess 2400
SafeGuard
(SafeGuardOS) (config) #
Setting the SNMP Physical Location
To set the SNMP physical location of the device, use the snmp-server sysinfo location
command. The syntax for the Global Configuration command is:
snmp-server sysinfo location location
The following example indicates that the SNMP server is located in the central data
center:
(SafeGuardOS) # configure terminal
(SafeGuardOS) (config) # snmp-server sysinfo location central_data_center
(SafeGuardOS) (config) #
Syntax Description name Name of a device. It can be up to 31
alphanumeric characters.
Syntax Description location Text used to identify the location of the device.
It can be up to 31 alphanumeric characters.
The factory default is blank.