User Guide

OmniAccess SafeGuard OS Administration Guide
65
Chapter 2: Accessing and Managing the System
To display the device compact flash memory information for either a SafeGuard
Controller or a SafeGuard Switch, use the show hardware media command in Privileged
Exec mode.
show hardware media
The command has no options or parameters.
The following example is representative of the command output:
(SafeGuardOS) #show hardware media
Compact Flash................................... 1024 MB (Free 978 MB)
(SafeGuardOS) #
The fields in the output represent:
Displaying the Serial Communication Settings for the Device
To display serial communication settings for the device, use the show serial command in
Privileged Exec mode.
show serial
The command has no options or parameters. The following example is representative of
the command output:
(SafeGuardOS) #show serial
Serial Port Login Timeout (minutes)............ 5
Baud Rate (bps)................................ 9600
Character Size (bits).......................... 8
Flow Control................................... Disable
Stop Bits...................................... 1
Power Supply SafeGuard Controllers have one power supply that cannot
be hot swapped. The SafeGuard Switch has two power
supplies that can be hot swapped.
If the power supply is present and operating, it displays as
PASS. If the power supply is absent or not operating, it
displays as FAIL.
Field Description
Compact Flash The amount of compact flash memory (in megabytes).
Free indicates the number of megabytes of available
space.
Field Description