User Guide

OmniAccess SafeGuard OS Administration Guide
62
Chapter 2: Accessing and Managing the System
The fields in the output represent:
Display Description
Manufacturer Identifies the device as manufactured by Alcatel-Lucent
System Description Factory-assigned description of the system
Serial Number Serial number of the device.
Burned In MAC Address Burned-in MAC address. Used as the MAC address for the
serviceport.
Software Version Version of SafeGuard OS. The version is in the format of:
version.release.maintence_level.build_number
Software Build Date When the build was created
Image Selected Primary or secondary image being run
Image Booted Method used to boot the device. Valid entries are primary,
secondary and TFTP
Primary Image Release information of the primary image
Secondary Image Release information of the secondary image
Bootstrap Version Bootrom version number. The current release of SafeGuard
OS supports a simple boot loader or a two-stage boot
loader. If both boot loaders are on the system, the simple
boot loader cannot read version information from the two-
stage boot loader. In that case, the show version
command does not display bootRom information.
Active Bootrom Version The active bootrom version number.
Bootrom Selected Which bootrom is selected, primary or secondary.
Bootrom Booted Which bootrom was used to boot the device.
Primary Bootrom
Version
Version of primary bootrom version.
Secondary Bootrom
Version
Version of secondary bootrom version.
System Time Date and time stamp.
CPU Utilization Percentage being used by the user, system and the
remaining percentage for idle.
Free Memory Amount of free memory in megabytes; amount of total
memory in megabytes.
Uptime Elapsed time since the last reboot.