User Guide

OmniAccess SafeGuard OS Administration Guide
57
Chapter 2: Accessing and Managing the System
show sntp client
This command has no options or parameters.
The following example is representative of the command output:
(SafeGuardOS) #show sntp client
Client Supported Modes: unicast broadcast
SNTP Version: 4
Port: 123
Client Mode: disabled
The fields in the show sntp client output represent:
To display SNTP information, use the show sntp info command in Privileged Exec mode.
show sntp info
The following example shows a sample output from the show sntp info command:
(SafeGuardOS) #show sntp info
Last Update Time: Never
Last Unicast Attempt Time: Dec 16 11:35:10 2006 PST
Last Attempt Status: Request Timed Out
Broadcast Count: 0
Display Description
Client Supported Modes Displays the supported SNTP Modes (Broadcast
or Unicast).
SNTP Version Displays the highest SNTP version the client
supports.
Port Displays the SNTP client port.
Client Mode Displays the configured SNTP client mode.
Poll Interval Displays the poll interval value for SNTP clients in
seconds as a power of two.
Poll Timeout Displays the poll timeout value in seconds for
SNTP clients.
Poll Retry Displays the poll retry value for SNTP clients.