User Guide

OmniAccess SafeGuard OS Administration Guide
55
Chapter 2: Accessing and Managing the System
(SafeGuardOS) (config) # exit
(SafeGuardOS) #
To delete this server, use the no version of the command.
2 Validate the SNTP server setup using the show sntp server command in
Privileged Exec mode.
show sntp server
This command has no options or parameters.
The following example is representative of the command output:
(SafeGuardOS) #show sntp server
Most recent SNTP response
-------------------------
Server IP Address: 172.16.3.100
Server Type: ipv4
Server Stratum: 15
Server Reference Id:
Server Mode: Server
Server Maximum Entries: 3
Server Current Entries: 1
SNTP Servers
------------
IP Address: 172.16.3.100
Address Type: IPV4
Priority: 1
Version: 4
Port: 123
Last Update Time: Jul 28 00:01:46 2006 UTC
Last Attempt Time: Jul 28 00:01:46 2006 UTC
Last Update Status: Success
Total Unicast Requests: 5888
Failed Unicast Requests: 164
(SafeGuardOS) #
The fields in the show sntp server output represent:
Display Description
Server IP Address Displays the address of the configured SNTP server.
Server Type Displays the address type of server.
Server Stratum Displays the claimed stratum of the server for the
last received valid packet.