User Guide
OmniAccess SafeGuard OS Administration Guide
49
Chapter 2: Accessing and Managing the System
The command has no options or parameters.
The following output is representative of the show serviceport command on a SafeGuard
Switch. This command’s output on a SafeGuard Controller would be similar, but with the
addition of “Gateway Address” following the “Subnet Mask” line:
(SafeGuardOS) #show serviceport
Current ServicePort IP configuration
IP Address..................................... 172.16.1.10
Subnet Mask.................................... 255.255.192.0
ServPort Configured Protocol Current........... None
Burned In MAC Address.......................... 00:12:36:FE:92:CE
ServicePort Link Status........................ Up
ServicePort Admin Status....................... Enabled
Configured ServicePort speed................... auto-negotiate
ServicePort Duplex Status...................... 100M FULL
ServicePort Statistics
Total Packets Received ........................ 110
Total Packets Transmitted ..................... 46
Total Bytes Received........................... 9784
Total Bytes Transmitted........................ 4166
Total Bad Packets Received..................... 0
Total Packet Transmit Problems................. 0
No Receive Space in Buffers.................... 0
No Transmit Space in Buffers................... 0
Multicast Packets Received ................... 0
Total Collisions............................... 0
ServicePort Detailed Rx Statistics
Packet Length Errors........................... 0
Ring Buffer Overflow Errors.................... 0
CRC Errors..................................... 0
Frame Alignment Errors......................... 0
Fifo Overrun Errors............................ 0
Missed Errors.................................. 0
ServicePort Detailed Tx Statistics
Aborted Errors................................. 0
Carrier Errors................................. 0
Fifo Overrun Errors............................ 0
Heartbeat Errors............................... 0
Window Errors.................................. 0
The fields in the output represent:
Field Description
Current service Port IP configuration
IP address IP address of the interface.
Subnet Mask IP subnet mask for this interface.