User Guide

OmniAccess SafeGuard OS Administration Guide
39
Chapter 2: Accessing and Managing the System
Copying the System Debug File
To copy a system debug file, use the copy system:dump command in Global
Configuration mode.
copy system:dump
://ip/{filepath/}filename
Displaying the Current HTTP Information
To display the current HTTP information, use the show ip http command in Privileged
Exec mode.
show ip http
This command has no parameters or variables.
Exiting or Logging Out of a Command Line Session
To exit or log out of a command level session, use either the exit or logout command in
any mode.
exit
logout
The command has no options or parameters. For example:
(SafeGuardOS) # logout
Configuring Management Users
The Admin user has full access to all CLI both from the front-panel ports and from the
rear-panel management port.
■ Management Users – A management user can be defined as having three levels of
authority:
— Admin-user has full access to all commands.
— Privilege-user has permission to execute action, clear and configure
commands, with the exception of the user management commands.
—Exec-user has access to limited commands.
Syntax Description ip Specifies the IP address of the TFTP server.
filepath (Optional) Specifies the directory path to the file.
filename Specifies the filename of the file being saved.