User Guide

OmniAccess SafeGuard OS Administration Guide
358
Chapter 9: End Point Validation
This example shows all of the hosts in the posture database:
(SafeGuardOS) #show epv all
Contents of Host posture database
---------------------------------
Number of Rows:3
Host IPHost MACHost PostureLast Scan StartedLast Scan Finished
--------------------------------------------------------------
10.25.0.300:0e:0c:80:1a:dcunknownNEVERNEVER
192.168.0.10200:11:43:4e:78:07unknownNEVERNEVER
192.168.0.10900:11:43:4e:78:48healthyOct 26 2006 11:51:50Oct 26 200611:52:00
This example shows the status of all known hosts with unknown posture:
(SafeGuardOS) #show epv posture unknown
Contents of Host posture database
---------------------------------
Number of Rows:2
Host IPHost MACHost PostureLast Scan StartedLast Scan Finished
-------------------------------------------------------------
10.25.0.300:0e:0c:80:1a:dcunknownNEVERNEVER
192.168.0.10200:11:43:4e:78:07unknownNEVERNEVER
This example shows the EPV posture of the end point with IP address 10.25.0.3:
(SafeGuardOS) #show epv ip 10.25.0.3
Contents of Host posture database
---------------------------------
Number of Rows:1
Host IPHost MACHost PostureLast Scan StartedLast Scan Finished
------------------------------------------------------------
10.25.0.300:0e:0c:80:1a:dcunknownNEVERNEVER
This example shows the EPV posture of the end point with MAC address
00:0e:0c:80:1a:dc:
(SafeGuardOS) #show epv mac 00:0e:0c:80:1a:dc
Contents of Host posture database
---------------------------------
Number of Rows:1
Host IPHost MACHost PostureLast Scan StartedLast Scan Finished
------------------------------------------------------------
10.25.0.300:0e:0c:80:1a:dcunknownNEVERNEVER
Showing EPV User Status
In addition to displaying EPV status based on host IP, the EPV state information has been
integrated with the output of the show aaa users command.
This command has the following syntax:
show aaa users [options]