User Guide

OmniAccess SafeGuard OS Administration Guide
357
Chapter 9: End Point Validation
(SafeGuardOS) #configure terminal
(SafeGuardOS)(config) #epv ics-config admin-info “For assistance with your
software problem, contact the help desk at 4-HELP (4-4357).”
(SafeGuardOS)(config) #
Displaying and Clearing the EPV Posture State
There are Privileged Exec Show commands to display EPV and EPV-policy related
configurations:
See the following sections for more details:
■ Showing EPV Host Status
■ Showing EPV User Status
■ Configuring EPV Rescan Timers
■ Configuring Refresh Window
■ Showing the EPV Configuration
Showing EPV Host Status
The Privileged Exec show epv command displays the EPV status of a host by IP address,
MAC address, its posture, or by all hosts.
show epv [ip ip_addr | mac mac_addr | posture [healthy | unknown] all]
The following sample output is representative of the show epv command:
Command Use
show epv Displays the EPV configuration of a host.
show policy epv Displays the EPV configuration of a host.
Syntax Description ip_addr Displays the host with this IP address.
mac_addr Displays the host with this MAC address.
healthy Displays hosts with healthy posture.
unknown Displays hosts that are in the process of
having their posture checked and those
that have failed the posture check.
all Displays the posture of all known hosts.