User Guide

OmniAccess SafeGuard OS Administration Guide
329
Chapter 7: Establishing a Security Policy
application FTP
application SSH
application TELNET
!
application-group Web
application ALT-HTTP
application HTTP
!
Showing Policy-Based Mirroring
The Privileged Exec show monitor policy-based command displays the assignment for
the mirroring ports. The destination port for a OmniAccess 2400 SafeGuard is 0/21 and
for a OmniAccess 1000 SafeGuard it is 0/9.
show monitor policy-based
The command has no options or parameters.
The following sample output shows the format of the show monitor policy-based
command for a OmniAccess 2400 SafeGuard:
(SafeGuard OS) #show monitor policy-based
mirror port m1: 0/21
Showing Network Zones
The Privileged Exec show network-zone command either displays the configuration of a
named network zone or the configuration of all network zones on the SafeGuard device.
show network-zone [zone_name |all]]
The following sample output shows the format from the show network-zone command
for a zone called print_pool:
(SafeGuard OS) #show network-zone print_pool
network-zone print_pool
host ip-address 192.168.4.7
range 192.168.5.1 192.168.5.50
network 192.168.200.0 255.255.255.0
!
(SafeGuard OS) #
Syntax Description zone_name Displays the named network zone.
all Displays all configured network zones.