User Guide

OmniAccess SafeGuard OS Administration Guide
271
Chapter 6: Configuring Authentication and Role Derivation
Showing Summary Information for 802.1x
Use the show aaa dot1x summary command to display a summary of the global 802.1x
configuration for a specific interface or for all switch interfaces.
show aaa dot1x summary [slot/port | all
This sample output represents output for a single port:
(SafeGuardOS) #show aaa dot1x summary 0/22
Operating Reauthentication
Interface Control Mode Control Mode Enabled Port Status
--------- ------------------ ------------------ ---------------- -------------
0/22 auto auto FALSE Authorized
In this example, the output represents output for all ports.
(SafeGuardOS) #show aaa dot1x summary all
Operating Reauthentication
Interface Control Mode Control Mode Enabled Port Status
--------- ------------------ ------------------ ---------------- -------------
0/1 auto auto FALSE Unauthorized
EAPOL Logoff Frames
Received
Displays the
number of EAPOL logoff frames of any
type that are
received by this authenticator.
Last EAPOL Frame Version Displays the protocol version number carried in the most
recently received EAPOL frame.
Last EAPOL Frame Source
Displays the
source MAC address carried in the most
recently received EAPOL frame.
EAP Response/ID Frames
Transmitted
Displays the number of EAP response/identity frames
transmitted by this authenticator.
EAP Response Frames
Transmitted
Displays the number of valid EAP response frames (other
than resp/id frames) received by this authenticator.
Invalid EAPOL Frames
Received
Displays
the number of EAPOL frames received by
this authenticator in which the frame type is not
recognized
.
EAPOL Length Error
Frames Received
Displays
the number of EAPOL frames received by
this authenticator that had a length error.
slot/port Displays a summary of the 802.1x configuration for this interface. The
slot number is 0.
all Displays a summary of the 802.1x configuration for all interfaces.
Display Description