User Guide

OmniAccess SafeGuard OS Administration Guide
270
Chapter 6: Configuring Authentication and Role Derivation
Showing 802.1x Statistics
Use the show aaa 802.1x statistics command to display the statistics for a specified
interface.
show aaa dot1x statistics slot/port
The following example is representative of the command output:
(SafeGuardOS) #show aaa dot1x statistics 0/22
Port........................................... 0/22
EAPOL Frames Received.......................... 0
EAPOL Frames Transmitted....................... 1
EAPOL Start Frames Received.................... 0
EAPOL Logoff Frames Received................... 0
Last EAPOL Frame Version....................... 0
Last EAPOL Frame Source........................ 00:00:00:00:00:00
EAP Response/Id Frames Received................ 0
EAP Response Frames Received................... 0
EAP Request/Id Frames Transmitted.............. 0
EAP Request Frames Transmitted................. 0
Invalid EAPOL Frames Received.................. 0
EAPOL Length Error Frames Received............. 0
(SafeGuardOS) #
The fields in the output represent:
Control Direction Displays the control direction for the specified port. The
control direction is always both directions.
Syntax Description slot/port Displays the 802.1x statistics for this
interface. The slot number is 0.
Display Description
Port Displays the interface number.
EAPOL Frames Received
Displays
the number of valid EAPOL frames of any
type that are
received by this authenticator.
EAPOL Frames Transmitted
Displays the
number of EAPOL frames of any type
that are
transmitted by this authenticator.
EAPOL Start Frames
Received
Displays the
number of EAPOL start frames of any
type that are
received by this authenticator.
Display Description