User Guide

OmniAccess SafeGuard OS Administration Guide
256
Chapter 6: Configuring Authentication and Role Derivation
Displaying Active Directory Configurations
There are Privileged Exec show commands to display AD and LDAP configurations. See
the following sections:
■ Showing AAA LDAP Servers Configuration
■ Showing AAA LDAP Servers Status
Showing AAA LDAP Servers Configuration
To display information about AD and LDAP configurations, use the show aaa ldap-
servers configuration command. The Privileged Exec command has the following
syntax:
show aaa ldap-servers configuration
The command has no options or parameters. In the following example is representative
of the output.
(SafeGuardOS) # show aaa ldap-servers configuration
Server Domain.................................. authdomain
Server IP...................................... 172.58.36.17
Bind DN........................................ cn=Administrator,c=Users,dc=auth,dc=com
Base DN........................................ dc=Alcatel-Lucent,dc=com
Timeout........................................ 1
Port Number.................................... 636
SSL............................................ Enabled
(SafeGuardOS) #
The output of the command has these fields:
Field Description
Server Domain The domain name of the LDAP server.
Server IP The IP address the server. This address must be unique
across the device.
Bind DN The Distinguished Name for the bind request.
Base DN The Distinguished Name used as a root of all LDAP
searches
Timeout The currently configured time out.
Port Number The port for contacting the LDAP server.