User Guide

OmniAccess SafeGuard OS Administration Guide
218
Chapter 6: Configuring Authentication and Role Derivation
This command has no options or parameters. The output of the command is similar to
this example:
(SafeGuardOS) #show aaa debug
CACHE AGE...................................... 0
L2 AUTH ADDED.................................. 0
L2 AUTH REMOVED................................ 0
L2 AUTH REFRESH................................ 0
L2 AUTH IGNORE................................. 0
L2 AUTH ERROR.................................. 0
L3 AUTH ADDED.................................. 0
L3 AUTH REMOVED................................ 0
L3 AUTH REFRESH................................ 0
L3 AUTH IGNORE................................. 0
L3 AUTH ERROR.................................. 0
L3 MAP ADDED................................... 0
L3 MAP REMOVED................................. 0
L3 MAP UPDATE.................................. 0
L3 MAP ERROR................................... 0
L3 ACTIVE...................................... 0
AES ERROR...................................... 0
Current State.................................. enabled
FDB events..................................... disabled
Safe Mode...................................... enabled
Port Check..................................... enabled
Total Intercepts............................... 3389
Total PDU Msgs................................. 2942
Total PDUs OK.................................. 2629
Total PDU Errors............................... 313
FDB Events..................................... 0
Total Ticks.................................... 157927
Max Protocols.................................. 4
Name Status OK ERROR CUR MAX HIGH TOUT
---------------- -------- ------ ------ ------ ------ ------ ------
DHCP : enabled 2591 295 0 256 238
RADIUS : enabled 18 7 0 128 20
KRB.UDP : enabled 20 11 0 128 00
KRB.TCP : enabled 0 0 0 0 00
(SafeGuardOS) #
The fields in the output represent:
Field Description
Name PDU type.
Status State of the protocol, either enabled or disabled.
OK Number of PDUs that are alright. This sum of this column
should match the total PDUs OK field.