User Guide

OmniAccess SafeGuard OS Administration Guide
213
Chapter 6: Configuring Authentication and Role Derivation
SOAP Reqs...................................... 1
SOAP Errors.................................... 0
AES Errors..................................... 0
Ticks.......................................... 117
DHCP Age Out................................... 1
These counters can be cleared with the command clear host counters.
Displaying Layer 3 Devices
Up to 32 MAC address can be configured as Layer 3 devices. To display information
about these addresses, use the show aaa session-tracking l3device command.
show aaa session-tracking l3device
This command has no options or parameters. The following is sample output from the
command:
(SafeGuardOS) #show aaa session-tracking l3device
Layer 3 Devices
Total Count : 4
MAC Address Description
---------------- --------------------------------
00:c0:a8:01:14:00 test14
00:c0:a8:01:21:00 test21
00:c0:a8:01:26:00 test26
00:c0:a8:01:04:00 test4
The fields of the output represent:
Displaying Authenticated Users
To display authenticated users, use the show aaa users command. If you specify the
command without options, all authenticated users are displayed.
Field Description
Total Count Total number of MAC addresses configured. The system
limit is 32.
MAC address MAC address for the L3 device. MAC addresses may be
specified in any of the following formats:
■ aa:bb:cc:dd:ee:ff
■ aabb:ccdd:eeff
■ aa-bb-cc-dd-ee-ff
■ aabb.ccdd.eeff
■ aabbccddeeff
Description Description for the entry, if provided.