User Guide

OmniAccess SafeGuard OS Administration Guide
211
Chapter 6: Configuring Authentication and Role Derivation
Based on the options selected, this command displays in tabular or single-user form the
following information.
In the detail mode the following additional information is shown:
macaddr MAC address of the mapping. MAC addresses
may be specified in any of the following
formats:
■ aa:bb:cc:dd:ee:ff
■ aabb:ccdd:eeff
■ aa-bb-cc-dd-ee-ff
■ aabb.ccdd.eeff
■ aabbccddeeff
slot/port Physical port where the mapping was
detected.
vlanid VLAN that the mapping was detected on.
VLAN 1 is the default VLAN.
host String name of the host that the IP is assigned
to.
Field Description
Port Physical interface this L2 interface was seen on.
VLAN VLAN traffic was seen on.
MAC MAC address of this L2 interface.
Type HOST/RTR indicates if this is an L2/L3 interface.
Learned Time when this interface was first seen.
Idle Indicates if traffic has been seen from this interface, or it
was just learned from HA.
Field Description
HA Owner Local/Remote indicates who “owns” the interface from
the timer perspective.
HA State ADDED/REMOVED/PENDING TRAFFIC the state field
indicates the interface was just ADDED, is being
REMOVED pending HA notification, or was learned from
an HA peer that has failed but has not sent traffic yet.