User Guide

OmniAccess SafeGuard OS Administration Guide
209
Chapter 6: Configuring Authentication and Role Derivation
Based on the options selected, this command displays in tabular or single-user form the
following information.
Field Description
Port The physical port where the mapping was detected. The
interface is shown in slot/port notation.
VLAN The VLAN the mapping was detected on. VLAN 1 is the
default VLAN.
MAC The MAC address of the mapping. MAC addresses may
be specified in any of the following formats:
■ aa:bb:cc:dd:ee:ff
■ aabb:ccdd:eeff
■ aa-bb-cc-dd-ee-ff
■ aabb.ccdd.eeff
■ aabbccddeeff
IP The IP address of the mapping.
Source The source of the mapping. Possible options are:
■ dhcp – The mapping was learned via DHCP
■ lsp – The mapping was learned from LSP
Role Name A string role name that has been assigned to this IP.
Unauthenticated indicates that this user failed
authentication. No role will be assigned if authentication
failed. Authenticated indicates the default system role
has been assigned.
Learned The time at which the L3 entry was learned.
HA Indicates whether a local or remote high availability
server. Possible values are:
■ LOCAL – Indicates that traffic for this L3 interface has
been seen on this peer.
■ REMOTE – Indicates that this L3 interface was learned
from the other HA peer.
Ed. Note: