User Guide

OmniAccess SafeGuard OS Administration Guide
208
Chapter 6: Configuring Authentication and Role Derivation
no aaa session-tracking l3device mac
Use the show aaa session-tracking l3device command to display the list of currently
configured Layer 3 devices. This command is described in Displaying the Current Contents
of the Mapping Table on page 208.
Displaying the Current Contents of the Mapping Table
To display the current contents of the mapping table, use the show host l3 interfaces
Privileged Exec command. To see all of the entries in the table, enter the command
without any options.
show host l3 interfaces {[ip-address ipaddr] | [mac-address macaddr] |
[
port-number slot/port] | [vlan vlanid] | [hostname host]}
Syntax Description mac MAC addresses may be specified in any of
the following formats:
■ aa:bb:cc:dd:ee:ff
■ aabb:ccdd:eeff
■ aa-bb-cc-dd-ee-ff
■ aabb.ccdd.eeff
■ aabbccddeeff
Syntax Description ipaddr IP address of the mapping.
macaddr MAC address of the mapping. MAC addresses
may be specified in any of the following
formats:
■ aa:bb:cc:dd:ee:ff
■ aabb:ccdd:eeff
■ aa-bb-cc-dd-ee-ff
■ aabb.ccdd.eeff
■ aabbccddeeff
slot/port Physical port where the mapping was
detected.
vlanid VLAN that the mapping was detected on.
VLAN 1 is the default VLAN.
host String name of the host that the IP is assigned
to.