User Guide

OmniAccess SafeGuard OS Administration Guide
198
Chapter 5: Setting Up SafeGuard Switches
The fields in the show bootpdhcprelay output represent:
Clearing BOOTP or DHCP Relay Information
To clear BOOTP or DHCP relay information, use the clear bootpdhcprelay statistics
command in Privileged Exec mode.
clear bootpdhcprelay statistics
The command has no parameters or variables.
The following example is representative of the command output:
(SafeGuardOS) #show bootpdhcprelay
Maximum Hop Count.............................. 8
Minimum Wait Time(Seconds)..................... 3
Admin Mode..................................... Enable
Server IP Address.............................. 172.56.20.1
Circuit Id Option Mode......................... Enable
Requests Received.............................. 40
Requests Relayed............................... 40
Packets Discarded.............................. 0
(SafeGuardOS) #clear bootpdhcprelay statistics
(SafeGuardOS) #show bootpdhcprelay
Maximum Hop Count.............................. 8
Minimum Wait Time(Seconds)..................... 3
Admin Mode..................................... Enable
Server IP Address.............................. 172.56.20.1
Circuit Id Option Mode......................... Enable
Requests Received.............................. 0
Display Description
Maximum Hop Count Maximum allowable relay agent hops.
Minimum Wait Time
(Seconds)
M
inimum wait time.
Admin Mode
Indicates
whether the relaying of requests is
enabled or disabled
.
Server IP Address IP address of either the BOOTP or DHCP relay server.
Circuit Id Option Mode Indicates if the DHCP circuit ID option is enabled or
disabled.
Requests Received Number of requests received.
Requests Relayed Number of requests relayed.
Packets Discarded Number of packets discarded.