User Guide

OmniAccess SafeGuard OS Administration Guide
181
Chapter 5: Setting Up SafeGuard Switches
The following example shows the show port-security command using the all keyword:
(SafeGuardOS) (interface 0/8)#show port-security all
Admin Dynamic Static Violation
Intf Mode Limit Limit Trap Mode
------ ------- ---------- --------- ----------
0/1 Enabled 124 10 Disabled
0/2 Disabled 600 20 Disabled
0/3 Disabled 600 20 Disabled
0/4 Enabled 600 20 Disabled
0/5 Disabled 600 20 Disabled
0/6 Disabled 600 20 Disabled
0/7 Disabled 600 20 Disabled
0/8 Enabled 600 20 Disabled
0/9 Disabled 600 20 Disabled
0/10 Disabled 600 20 Disabled
0/11 Disabled 600 20 Disabled
0/12 Disabled 600 20 Disabled
0/13 Disabled 600 20 Disabled
0/14 Disabled 600 20 Disabled
0/15 Disabled 600 20 Disabled
0/16 Disabled 600 20 Disabled
0/17 Disabled 600 20 Disabled
0/18 Disabled 600 20 Disabled
0/19 Disabled 600 20 Disabled
--More-- or (q)uit
0/20 Disabled 600 20 Disabled
0/21 Disabled 600 20 Disabled
0/22 Disabled 600 20 Disabled
0/23 Disabled 600 20 Disabled
0/24 Disabled 600 20 Disabled
0/25 Disabled 600 20 Disabled
0/26 Disabled 600 20 Disabled
0/27 Disabled 600 20 Disabled
0/28 Disabled 600 20 Disabled
0/29 Disabled 600 20 Disabled
0/30 Disabled 600 20 Disabled
0/31 Disabled 600 20 Disabled
0/32 Disabled 600 20 Disabled
0/33 Disabled 600 20 Disabled
0/34 Disabled 600 20 Disabled
0/35 Disabled 600 20 Disabled
0/36 Disabled 600 20 Disabled
0/37 Disabled 600 20 Disabled
0/38 Disabled 600 20 Disabled
--More-- or (q)uit
Violation Trap Mode Whether violation traps are enabled.
Field Description