User Guide

OmniAccess SafeGuard OS Administration Guide
180
Chapter 5: Setting Up SafeGuard Switches
Converting Dynamically Locked Address To Statically Locked
Addresses
To convert dynamically locked MAC addresses to statically locked addresses, use the
port-security mac-address move command in Interface Configuration mode.
port-security mac-address move
This command has no parameters.
The following examples shows this command:
(SafeGuardOS) (interface 0/4)#show port-security static 0/4
There are no dynamically learned MAC addresses.
(SafeGuardOS) (interface 0/4)#port-security mac-address move
(SafeGuardOS) (interface 0/4)#show port-security static 0/4
Number of static MAC addresses configured: 1
Statically configured MAC Address VLAN ID
--------------------------------- -------
00:00:00:22:22:22 1
Displaying the Port Security Settings
To display the port security settings, use the show port-security command in Privileged
Exec mode.
show port-security [slot/port | all]
The fields in the output represent:
Syntax Description slot/port Slot and port number to display.
all Display the settings on all interfaces
Field Description
Admin Mode Port Locking mode for the entire system. This field
displays if you do not supply any parameters.
Admin Mode Port Locking mode for the Interface.
Dynamic Limit Maximum dynamically allocated MAC Addresses.
Static Limit Maximum statically allocated MAC Addresses.