User Guide

OmniAccess SafeGuard OS Administration Guide
121
Chapter 3: Working with Configuration Files and Upgrading Images
(SafeGuardOS) #
The fields of the output represent:
Following is an example of the show version output when using the dual-stage
bootloader.
(SafeGuardOS) #show version
Manufacturer................................... Alcatel-Lucent Inc.
System Description............................. OmniAccess 2400 SafeGuard
Base mgmt port MAC Address..................... 00:12:36:FF:F9:E0
Software Version............................... SafeGuardOS-3.0.2.x-cp
Software Build Date............................ Jul 30 10:45:49 PDT 2006
Image Selected................................. Secondary
Image Booted................................... Secondary
Field Description
Manufacturer Indicates the device is manufactured by Alcatel-Lucent
System Description The model number of the device
Base Mgmt Port MAC
Address
The MAC address of the management port
Software Version The software version; an extension of Captive Portal
indicates an EPV version.
Software Build Date The time and date that the build was created.
Image Selected Indicates whether the primary or secondary image was
selected to boot.
Image Booted Indicates whether the primary or secondary image was
actually booted.
Primary Image The image name in the primary image area of flash
memory.
Secondary Image The image name in the secondary image area of flash
memory.
Bootrom Version Displays the boot loader version for simple boot loader
systems.
System Time The creation date and time for the system.
CPU Utilization Current CPU utilization, both of the user and the system.
Free Memory The amount of free memory and total memory.
Uptime The amount of time since the last reload.
Protection Mode The protection mode configured for the system. Possible
values are pass-thru, monitor, and protect.