User Guide

OmniAccess SafeGuard OS Administration Guide
120
Chapter 3: Working with Configuration Files and Upgrading Images
2 Specify using the 3.0 image in either the primary or secondary image location as
described in Specifying the Boot Loader on page 118. If not specified, the boot loader
uses the primary image.
3 Reboot the system.
When the system comes back up, SafeGuard OS detects the dual-stage boot loader
and that it was booted from a raw image partition. SafeGuard OS installs the
dual-stage boot loader and converts the raw image partition to the new format.
4 Reboot the system again.
The dual-stage boot loader boots the SafeGuard OS from the new format.
Displaying Image and Boot Loader Information
The show version command displays both image and boot loader information. The
following example is representative of the output of the command for an EPV image with
a simple boot loader.
(SafeGuardOS) #show version
Manufacturer................................... Alcatel-Lucent Inc.
System Description............................. OmniAccess 2400 SafeGuard
Serial Number.................................. 0538FCS002
Burned In MAC Address.......................... 00:12:36:FF:DA:FE
Software Version............................... SafeGuardOS-3.0.2.X-xp
Software Build Date............................ Dec 19 22:33:40 PST 2006
Image Selected................................. Secondary
Image Booted................................... Secondary
Primary Image.................................. SafeGuardOS-3.0.2.X-xp-release-
042512192006
Secondary Image................................ SafeGuardOS-3.0.2.X-xp-release-
223312192006
Bootstrap Version.............................. 1.0.0.3 (Boot Package: 1.0.0.10)
Active Bootrom Version......................... 2.0.0.26 (Boot Package:
1.0.0.10)
Bootrom Selected............................... Primary
Bootrom Booted................................. Primary
Primary Bootrom Version........................ 2.0.0.26 (Boot Package:
1.0.0.10)
Secondary Bootrom Version...................... 2.0.0.26 (Boot Package:
1.0.0.10)
System Time.................................... Dec 20 14:09:40 PST 2006
CPU Utilization................................ user: 0.98% system 27.45% idle:
71.57%
Free Memory.................................... 188 MB / Total 244 MB
Uptime......................................... 2 hours 54 minutes 46 seconds
bootpkg-
filename
Specifies the name of the boot loader
package being downloaded.