User Guide

OmniAccess SafeGuard OS Administration Guide
102
Chapter 2: Accessing and Managing the System
------- -- ----- ------ ------ --
--- ----- ------------
001236fffffecbc2 172.16.5.101 1 4 0
661 661 22:26:44 UTC 13-Feb-2006
■ Use the following Global Configuration command to display the current HA
configuration:
show ha info
The following output is representative of the show ha info command:
(SafeGuardOS) #show ha info
ha heartbeat-loss-threshold = 10 seconds
ha heartbeat-interval = 1 seconds
■
Use the following Global Configuration commands to display the authentication
tables used in HA configurations:
— The Interface Table contains an entry for each Layer 3 interface detected on the
network. Use the following Global Configuration command to display the
Interface Table:
show ha aaa interface-table
The output of the command has these fields:
Table 15 Field Descriptions of the Interface Table
Field Description
IP The IP address of a downstream device, which is used as the primary
key to this table. Each L3 learning event for a unique source gener-
ates a new entry in the table.
MAC The MAC address, which can be used as a secondary key to this
table. The system can learn an L2 mapping based on an L3 learning
event.
Hostname The hostname displays when the information is available to the L3
mapping event.
Interface
Spec
For an L3 learning event, the system records the port and VLAN infor-
mation for the user.
Credential ID This field binds an interface to a particular credential.
Role This is a list of roles assigned to a user interface.