User Guide

18 CHAPTER 4
Configuration Routing
WebView Web Interface User Guide
Routing
To see or modify route settings, expand the link for Routing under the Categories section on the left panel
of the screen. The route settings display as shown in Figure 10.
To create a new route, click New to display the Routing screen. To delete a route, click the Delete box for
that route. To see route details, click the routing entry.
NOTE: In this release, only Static routing is supported from the WebUI. To configure dynamic
routing, use the Command Line Interface.
Figure 10 Static Routes
Click Apply to save any changes. Click Reset Settings to reset the screen to its original settings, or click
Cancel to close the screen and return to the main Configuration screen without saving any changes.