User Guide

16 CHAPTER 4
Configuration LAN
WebView Web Interface User Guide
While this tab has no wizard properties it is laid out in a logical, top to bottom order starting with LAN,
WAN, Routing, Security, and finishing with Administration configurations. Each of these sections is
discussed below. Explanations appear on screen for each section and online help is available (click Help).
LAN
To see or modify LAN interface settings, click the link for LAN under the Categories section on the left
panel of the screen. The interface settings display as shown in Figure 8.
Figure 8 LAN Configuration
Click Apply to save any changes. Click Reset Settings to reset the screen to its original settings, or click
Cancel to close the screen and return to the main Configuration screen without saving any changes.