User Guide

13
WebView Web Interface User Guide
Firewall Setup
After you have configured your VPN configuration, click Zone Setup in the Firewall Setup
section of the Guided Setup screen. Zone Setup allows you to set the environment for your
Ethernet and WAN bundle interfaces.
NOTE: If you configured Zone Setup in the VPN setup section, you do not need to repeat zone
setup here. The values you set in the VPN setup section apply here as well.
To configure your firewall, (after selecting firewall policy on Figure 3) click Begin Firewall
Setup. The VPN Setup screen displays as shown in Figure 6.
Figure 6 Firewall Setup Screen (showing Inbound Policy)
Fill in the fields starting with Step 1. If you make a mistake, click Reset Settings to reset the
screen. Click Cancel to return to the previous screen without saving any changes. When you are
finished, click Apply.
If you need help on a particular field, click Help. Refer to the diagram on the left panel of the
screen for a visual explanation of what each step accomplishes.