User Guide

6 Quick Start Guide: OmniAcces 600-Series Routers Alcatel
Additional Cables
The following additional cables are required for installing the OmniAccess 601, OmniAccess 602, and OmniAccess
604.
Figure 4 Additional Cables Required
Tools Required
The following tools are required for installing the OmniAccess 601, OmniAccess 602, and OmniAccess 604.
Figure 5 Tools Required for Installation
Installation Site
The OmniAccess 601, OmniAccess 602, and OmniAccess 604 is designed to be installed in an equipment rack; on a
vertical surface; or on a flat, stable surface. The installation site should provide ample room for connecting cables and
should not be subject to extreme temperature shifts. The router should be located in close proximity to all relevant
telecommunication ports.
One or two RJ-45, male/male, category 5, twisted-pair cable
(Ethernet LAN connection)
One to two RJ-48C, male/male, 26 AWG (minimum) category 5,
straight-through cable (WAN connection)
#2 Phillips screwdriver
#3 Phillips screwdriver
1/4 inch flat blade screwdriver