User Guide

Alcatel Quick Start Guide: OmniAcces 600-Series Routers 23
Interface Port Configuration
The following are examples of T1, CT3, and DS3 interface configurations. To scroll through the options available at any
command prompt, press the Tab key. For descriptions of the options available at any command prompt, type help and
press Enter.
E1 Interface
Router> configure term
Router/configure> module e1 4
Router/configure/module/e1 4> clock_source line
Router/configure/module/e1 4> framing crc
Router/configure/module/e1 4> exit 2
Router/configure> cabletype monitor_port 1 twisted_pair
Router/configure> module e1 4
Router/configure/module/e1 4> linecode hdb3
Router/configure/module/e1 4> yellow_alarm gen_det
Router/configure/module/e1 4> exit 3
T1 Interface
Router> configure term
Router/configure> module t1 4
Router/configure/module/t1 4> clock_source line
Router/configure/module/t1 4> framing esf
Router/configure/module/t1 4> linecode b8zs
Router/configure/module/t1 4> yellow_alarm gen_det
Router/configure/module/t1 4> exit 3