User Guide

14 Quick Start Guide: OmniAcces 600-Series Routers Alcatel
Installing the OmniAccess 600-Series Router
The OmniAccess 601, OmniAccess 602, and OmniAccess 604 router can be installed on a table top, in a Telco
equipment rack (using the optional rack-mounting tray), or on a vertical surface (using the optional wall-mounting
assembly). The router ships with a Console cable. You will need to obtain additional cables for your specific application.
Refer to Figure 4 for more information.
Table Top Installation
Figure 12 Table Top Installation
To install the OmniAccess 601, OmniAccess 602, and OmniAccess 604 router for operation on a table top, follow this
procedure. Refer to Figure 12 which shows a Model OmniAccess 602.
1 Place the router on the table surface.
2 Attach the cable retainer to the DC power cord behind the molded strain relief on the cable.
3 Insert the DC power cable jack into the 12 VDC port on the back of the router.
4 Engage and secure the captive screw on the cable retainer in the threaded hole adjacent to the DC input jack on the
router.
5 Connect the appropriate ends of the AC power cord to the power supply and a 110/120 VAC outlet.
NOTE: Ensure that cables are routed out of the way of foot traffic.
110/120 VAC Outlet
Cable Retainer Bracket
Power Supply
(for OmniAccess
602 & 604)
Captive Screw
Threaded Hole
12 VDC Port