User Guide

Alcatel Quick Start Guide: OmniAcces 600-Series Routers 11
Front Panel LEDs
The Alcatel OmniAccess 602 router front-panel LEDs indicate real-time unit status. Table 4 provides information about
how to interpret the LED states. For more detailed LED information and troubleshooting tips, refer to the OmniAccess
601, OmniAccess 602, and OmniAccess 604 Installation Guide.
Table 4 OmniAccess 602 Router LEDs
LED description color
WAN Status 1-2 Indicates traffic activity on this interface
Green = normal activity
Red = alarm state
Yellow = test mode
Ethernet 0/1
Link/Act
Indicates traffic activity on this interface Green = link is operational
Blinking Yellow = either receiving or sending traffic
Red = packet collisions
HS
Indicates traffic speed on the interface Off = 10 Mbps
Green = 100 Mbps
Dup
Indicates the type of duplex mode Off = Half duplex
Green = Full duplex
Power
Indicates router power status Off = power off
Green = power on