User Guide

Chapter : BGP4 Configure Commands 55
Router User Guide
configure router bgp distance
This command changes the default distance value on a router.
Higher values are preferred.
parameter definition
syntax:
[ no ] distance distance < n >
example:
Alcatel-host/configure/router/bgp 10> distance 20
Table 9 Default Route Preference (Administrative Distance) Values
related commands
applicable systems:
All models.
distance Default preference value
The range is 0-255; the default is 170.
How Route is Learned Default
Preference
Command to Modify Default Preference
Directly connected network 0 Not configurable.
Static 1 Not configurable.
OSPF non-external route 10 configure router ospf distance ospf non_external
RIP 100 configure router rip distance
Generated or aggregate 130 Applicable to BGP only, and is not configurable.
OSPF AS external routes 150 configure router ospf distance ospf external
BGP 170 configure router bgp distance
configure router bgp aggregate_address
configure router bgp always_compare_med
configure router bgp default_metric
configure router bgp group
configure router bgp neighbor
configure router bgp redistribute