User Guide

Chapter : Generic Routing Commands 41
Router User Guide
example:
To display all routes, issue the show ip routes command.
example:
To display the route for a specific network and subnet, issue the show ip routes network 123.1.2.0
mask 255.255.255.0 command.
example:
To display the connected ip routes, issue the show ip routes connected command.
example:
To display static routes, issue the show ip routes static command.
example:
To display RIP routes, issue the show ip routes rip command.
example:
To display ospf routes, issue the show ip routes ospf command.
example:
Alcatel-host/show> ip routes bgp
The following screen display example is a typical display showing the destination IP address, metric,
netmask and gateway, status, Ethernet interface, and type of route.
applicable systems:
All models.