User Guide

40 Chapter : Generic Routing Commands
Router User Guide
show ip routes
This command displays IP routing information for Ethernet ports.
parameter definition
syntax:
show ip routes [ network < IP address > ] [ mask < netmask > ] [ protocol < all | bgp | connected |
ospf | rip | static > ] [ database < rib | fib > ]
The following table provides parameter definitions for the following screen display examples.
Table 8 Parameter Definitions
By default, information is displayed for all routes in the routing table. To display only specific route
information, specify the appropriate protocol or the network mask.
network Network IP address
Enter an IP address.
mask Network mask
Enter a netmask address
protocol
all
All protocols
bgp
Border Gateway protocol (BGP)
connected
Connected routes
ospf
Open Shortest Path First protocol (OSPF)
rip
Routing Information Protocol (RIP)
static
Static routes
database
rib
RIB routes
fib
FIB routes
term definition
Network Indicates the address of the remote network.
Next Hop Specifies the address of the next router to the remote network
Interface Specifies the interface through which the specified network can be reached.
PVC > Virtual (logical) circuit identification number.
Distance The administrative distance for the route.
Metric The metric for the route.