User Guide

Chapter : Multicasting 219
Router User Guide
The show and debug PIM commands are:
Configure PIM interface
hello holdtime
/configure/ip/pim/interface wan1> hello-holdtime <time>
Configure PIM interface
hello interval
/configure/ip/pim/interface wan1> hello-interval <time>
Configure PIM interface
Join/Prune Delay Timeout
/configure/ip/pim/interface wan1> join-prune-timeout
<time>
Configure PIM interface
Join/Prune Interval
/configure/ip/pim/interface wan1> join-prune-interval
<time>
Configure PIM interface
Join/Prune holdtime
/configure/ip/pim/interface wan1> join-prune-holdtime
<time>
Configure PIM interface as
border of PIM domain
/configure/ip/pim/interface wan1> boundary
SSM range
Configure the SSM range /configure/ip/pim> ssm-range <group-address>
<group-mask
Display PIM global
configuration
Alcatel> show ip pim global
Display PIMC timers
Alcatel> show ip pim timers
Display PIM interfaces Alcatel> show ip pim interfaces
Display PIM neighbors Alcatel> show ip pim neighbors
Display PIM Bootstrap
info
Alcatel> show ip pim bsr-info
Display PIM Candidate
RP info
Alcatel> show ip pim crp-info
Display PIM statistics Alcatel> show ip pim statistics
Display PIM RP set Alcatel> show ip pim rp-set
Display PIM Static RP Alcatel> show ip pim rp
Trace PIM packets
Alcatel >debug ip pim packet <pkt_type> <direction>
[interface_name ] [ dlci ]
Trace PIM state changes debug ip pim state
Trace PIM routes debug ip pim route
Trace PIM detail debug ip pim detail
Trace PIM debug debug ip pim debug
All Traces
Alcatel> debug ip pim all