User Guide

218 Chapter : Multicasting
Router User Guide
Configure MRT SPT
Multiplier
/configure/ip/pim> mrt-spt-multiplier <number>
Configure Probe Period /configure/ip/pim> probe-period <time>
Configure Registration
suppression timeout
/configure/ip/pim> register-suppress-timeout <time>
Configure DR to switch
immediate
/configure/ip/pim> dr-switch-immediate
Configure RP to switch
immediate
/configure/ip/pim> rp-switch-immediate
Configure Threshold for DR /configure/ip/pim> threshold-dr <bps>
Configure Threshold for RP /configure/ip/pim> threshold-rp <bps>
Configure to calculate
whole packet checksum
(for cisco interop)
/configure/ip/pim> whole-packet-checksum
Bootstrap Router related
Commands
Configure as candidate
BSR
/configure/ip/pim/cbsr> address <address>
Configure CBSR period /configure/ip/pim/cbsr> period <time>
Configure CBSR holdtime /configure/ip/pim/cbsr> holdtime <time>
Configure CBSR priority /configure/ip/pim/cbsr> priority <value>
RP commands
Configure as candidate RP /configure/ip/pim> crp
Configure as candidate RP
address
/configure/ip/pim/crp> address <ipaddress>
Configure candidate RP
group for advertisement
/configure/ip/pim/crp> group-add <address> [mask]
[priority]
Configure as candidate RP
holdtime
/configure/ip/pim/crp> holdtime <time>
Configure as candidate RP
period
/configure/ip/pim/crp> period <time>
Configure as candidate RP
priority
/configure/ip/pim/crp> priority <value>
Configure a static RP
address
/configure/ip/pim/> rp <address> <gaddress> [mask]
Inteface based
parameters
Configure PIM for an
interface
/configure/ip/pim> interface <interface_name>[:dlci_no]
Configure PIM mode for an
interface
/configure/ip/pim/interface wan1> mode [sparse | dense |
ssm | sparse-ssm ]
Configure PIM interface
assert holdtime
/configure/ip/pim/interface wan1> assert-holdtime <time>