User Guide

192 Chapter : RIP Configure Commands
Router User Guide
configure router rip interface neighbor
This command specifies a RIP neighbor for a specific interface.
Use this command multiple times to add multiple neighbors. When neighbors are specified, RIP
updates are unicast to those neighbors (and not broadcast or multicast on that segment).
parameter definition
syntax:
[ no ] neighbor < ip_address >
example:
Alcatel-host/configure/router/rip/interface ethernet0> neighbor 192.168.31.2
This example configures IP address 192.168.31.2 as a RIP neighbor of interface
Ethernet 0.
related commands
applicable systems:
All models.
ip_address Neighbor IP address
configure router rip interface authentication
configure router rip interface distribute_list
configure router rip interface metric
configure router rip interface mode
configure router rip interface passive
configure router rip interface split_horizon