User Guide

12 Chapter : Command Line Interface
Router User Guide
Figure 4 ? Help Screen
NOTE:
The default parameters for specific commands appear in parenthesis.
Global Commands All show, ping, and save commands are available from any level of the CLI. For example, the global
show commands allow the user to view current configuration settings, alarms, or tests without
exiting the configure mode. In (Figure 5), a user has displayed a bundle summary while configuring
a new bundle.
Similarly, the ping and save commands are available at any level of the CLI command. The ping
command verifies connectivity between the
Alcatel system and other network hosts; access to the
save commands from anywhere in the CLI ensures that your configurations may be saved
periodically.
> ?
NAME
xcli -- This is root and not a command
SYNTAX
COMMANDS <cr>
DESCRIPTION
COMMANDS -- Any of the following commands can be used
clear -- access clear commands
configure -- configure from ( flash / network / terminal )
debug -- accesses debug commands
dir -- directory of files in flash
erase -- access erase filesystem commands
file -- access file commands
password -- Change the user password
ping -- invoke ping
reboot -- reboot the system
reload -- reboot the system
save -- save configuration to ( local / network )
show -- access show commands
tclsh -- To invoke TCL shell
telnet -- open a telnet connection
test -- access test commands
trace -- trace route to destination address or host name
write -- write to terminal/network/flash
>