User Guide

Running H/F 2 #
Router User Guide
configure router ospf interface
This command configures an interface for OSPF routing.
parameter definition
syntax:
[ no ] interface < name > [ dlci < n > ] [ < area _id > ]
NOTE: When the “ospf” interface is created for the first time, area id must be specified. Thereafter, it is
optional.
example:
Alcatel-host/configure/router/ospf> interface Toronto 5
next-level commands
name Enter an interface name, such as ethernet0, ethernet1, or a bundle name.
dlci Data link connection identifier of the pvc (for frame relay use).
The range is 16 - 1022; there is no default.
area_id OSPF area ID
Enter either a decimal number or an IP address.
configure router ospf interface authentication
configure router ospf interface cost
configure router ospf interface dead_interval
configure router ospf interface hello_interval
configure router ospf interface neighbor
configure router ospf interface network
configure router ospf interface poll_interval
configure router ospf interface priority
configure router ospf interface retransmit_interval
configure router ospf interface transmit_delay