User Guide

# Running H/F 2
Router User Guide
configure router ospf area virtual_link hello_interval
This command configures the time interval between transmission of hello packets.
parameter definition
syntax:
[ no ] hello_interval < n >
example:
Alcatel-host/configure/router/ospf/area 1/virtual_link 100.10.1.5> hello_interval 10
related commands
applicable systems:
All models.
hello_interval The time in seconds.
The value configured must be the same for all routers and servers in the same network.
The range is 1 - 65535: the default is 10 seconds.
configure router ospf area virtual_link authentication
configure router ospf area virtual_link dead_interval
configure router ospf area virtual_link retransmit_interval
configure router ospf area virtual_link transmit_delay