User Guide

Alcatel OmniAccess 6000 Supervisor Card Installation Instructions 5
Port & Cable Specifications
Serial Port
The serial port is located on the front panel of the supervisor card. The port’s
RJ-45 female connector accepts an RS-232 serial cable a male connector.
Pin-outs are shown in Figure 1:
FIGURE 1 Serial Port
Communication settings for the console port are specified in Tab l e 2 :
TABLE 2 Console Terminal Settings
Baud Rate Data Bits Parity Stop Bits Flow Control
9600 8 None 1 None
Serial
Console Port
1
2
3
4
5
6
7
8
TxD
TGND
RGND
RxD
RJ-45 Female
Pin-Out
Direction
Input
Output