User Guide

The Line Cards 55
Chapter 7
Physical Description
Alcatel Line Card II Module
Module Fastening Screws
2 GE ports
Each GE port has its own LNK/ACT LED, located to the right of the port.
During operation, these LEDs provide the following status information:
For information on connecting the GE ports, see “Gigabit Ethernet Ports”.
Module Handle
This handle is used for removing or inserting the module into the switch
chassis.
POWER
STATUS
LNK/
ACT
LNK/
ACT
LNK/
ACT
POE
0
1
1
1
4
2
3
TABLE 8 GE LNK/ACT LED
Status Description
Off No Ethernet link on the port.
Green An Ethernet link has been established on the port, but no
data is currently being transmitted or received.
Flashing
Green
The port is transmitting or receiving data. The flashing rate is
proportional to your network activity.
Amber The Ethernet link on the port is encountering errors.
CAUTION—Do not use the line card handle to lift or
move the Alcatel Wireless LAN Switch. Serious
damage could result.
1
2
3