User Guide

The Supervisor Card 37
Chapter 6
Indicator LEDs
PCMCIA Drive
The PCMCIA drive accepts PCMCIA type II cards. The card may contain a
default image and initial boot configurations. It can also be used to upgrade
the software in the Alcatel Wireless LAN Switch.
The LED to the immediate right of the drive provides the following PCMCIA
status information:
To eject a card, press the ejector button located at the right-hand side of the
drive.
TABLE 6-1 Supervisor Card LEDs
LED State Description
Power
Green Module is receiving proper DC power.
Off Module is powered off.
Status
Green Module has booted and is functioning
properly.
Off Module is loading software.
Amber Module has loaded software and is
initializing.
Red Module has failed.
Active/Stan
dby
Green Module is in active mode.
Amber Module is in standby mode.
Off Module has not yet determined an
operating mode.
TABLE 6-2 PCMCIA Drive LED
Status Description
Off The drive is not in use or power is off.
Green The drive is accessing an inserted PCMCIA type II card.
3
4