User Guide

OmniAccess 6000 400W PSU Installation Notes: Installation Guide
2 Part 031655-00 May 2005
3. LEDs
When installed correctly, the bottom LED (AC OK) and the middle LED (DC OK)
should be green. The top LED (OTP - Over Temperature Protection) should be
off. For more information on the LEDs refer to the installation guide.
4. Fan intake vent
5. Power Cord Retaining Clip
6. Power connector
7. Power On/Off Switch - Off (|) and On (|)
To Install the 400W PSU
1. Select a power supply slot for the power supply.
The 400 W power supply (OAW-6000-PS400) can be installed in any of the
three slots.
CAUTION—Do not use the handle to lift the Alcatel Wireless LAN
switch.