User Guide

ICS Dissolvable Agent for SafeGuard Administration Guide
20
Chapter 3: General Administration Tasks
The default username and password is ‘icsadm/icsadm’. To add additional users and
passwords to the Alcatel-Lucent system, use the optional EPV configuration commands
described in the OmniAccess SafeGuard OS Administration Guide.
Configuration Workflow
After you plan your security configuration, you can begin to configure ICS. While you
may perform some configuration functions at any time, the following is the
recommended order for configuring your system:
1 Create enforcement rules.
Enforcement rules determine what applications your users must or must not have
on their computers. Enforcement rules are the basic building blocks of your
policies. You can use the same enforcement rules in multiple policies. For more
information, see Understanding Enforcement Rules on page 24.
2 Create policies.
Policies provide a convenient way to specify which enforcement rules you want
to use at the same time. For more information, see Creating Policies on page 32.
3 Activate your policy.
Choose the policy that you want to use. You can create as many different policies
as you want, but only one policy can be active at a time. See Activating Policies on
page 32.
4 Save.
After completing any configuration steps, you must always save to have your
changes take effect.
5 (Optional) Back up your ICS policy and portal configurations on the Alcatel-
Lucent device. See the section, Backing Up and Restoring ICS Policies and Rules in
the EPV chapter of the OmniAccess SafeGuard OS Administration Guide.
General Administration Tasks
Use this section to perform general configuration tasks, including:
■ Configuring ICS to Fail Open
■ Configuring Updates