8262 DECT Handset 8262Ex DECT Handset OXO Connect 2.
8262/8262Ex DECT Handset 1 GETTING TO KNOW YOUR TELEPHONE ............................................................................................. 5 1.1 1.2 1.3 1.4 1.5 1.6 PHONE DESCRIPTION STATUS ICONS MENU ICONS CALL ICONS ACCESSING THE MENU AND NAVIGATING HANDSET IN ICON DISPLAY MODE 5 7 8 9 10 11 2 GETTING STARTED ............................................................................................................................. 12 2.1 2.2 2.3 2.4 2.
8262/8262Ex DECT Handset 6 PROGRAMMING YOUR TELEPHONE ................................................................................................. 38 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 6.11 6.12 6.13 6.14 6.15 6.
8262/8262Ex DECT Handset This document describes the services offered by the 8262 DECT Handset connected to an OXO Connect. Operating conditions This approved DECT telephone is intended to be used with an ALE International cordless PABX. The following conditions must be respected, notably concerning the use of radioelectric frequencies: Changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
8262/8262Ex DECT Handset 1 Getting to know your telephone 1.1 Phone description Your phone can be configured to display icons or labels for software key. All descriptions in this user documentation refer to the handset in icon display mode. To ensure that your set matches the documentation make sure the phone is configured correctly. Refer to chapter: Handset in icon display mode . Answer the call.
8262/8262Ex DECT Handset Green steady: the phone is on the charger and the battery is fully charged. Red steady: the phone is on the charger and the battery is charging. Slow yellow flashing: telephonic event such as unread message, missed call, etc. Rapid yellow flashing: incoming call. LED Slow red flashing: out of coverage. Rapid red flashing: low battery warning. Slow blue flashing: bluetooth is activated.
8262/8262Ex DECT Handset 1.2 Status icons The status icons are displayed on the welcome screen and indicate the status of the telephone. Battery charge level ( > > > ). In charge (flashing icon). New event(s) - callback request, voice mail, text mail, missed call. Indicates a pending calendar notification. Appointment programmed. Call diversion activated. Vibrate mode active. Ringer active. Ringer disabled. Radio reception quality - Normal Mode. Radio reception quality - 50 mW power.
262/8262Ex DECT Handset 1.3 MENU icons The MENU is accessible from the welcome screen by pressing the Menu key. It provides access to all the functions available on your system. All icons are described in their unselected state. When selected, the icons are displayed in purple. Contacts: Manage your personal directory and access the company directory. Dialed: Call back the last number dialed. Forward: Divert your calls to another number. Messages: access the messaging portal.
8262/8262Ex DECT Handset 1.4 Call icons Making a call. Receiving a call. Call on hold. Accessing the directories. Transferring a call. Switching to DTMF signals. Setting up a conference. Forwarding your calls to your voice message service. Parking an external communication. Record the conversation. Manual hold. Cancel your enquiry call. In the event of a multiple call, the icons have symbols (such as numbers) to distinguish between the different callers.
8262/8262Ex DECT Handset 1.5 Accessing the MENU and navigating Access the menu. Press the MENU key. Select a function in the MENU. Navigating within a function. Use the navigator keys and press the OK key to select a function. You can move vertically along the various labels within the function. Press the OK key to validate your choice. OR You can move horizontally along the various icons within the function. Press the OK key to validate your choice.
8262/8262Ex DECT Handset 1.6 Handset in icon display mode Your phone can be configured to display icons or labels for software key. All descriptions in this user documentation refer to the handset in icon display mode. To ensure that your set matches the documentation make sure the phone is configured correctly. To activate the icon display mode: Access MENU. Settings Keys Soft key display Icon: display icons. Text: Display labels.
8262/8262Ex DECT Handset 2 Getting started In order to have a fully operational 8262 DECT Handset, make sure that you have the following items: the battery, the AC/DC adapter, the power supply and the USB cable. Your phone is IP65 compliant but you must remember to firmly close all covers. Never charge or install the battery in an ATEX (potentially explosive atmosphere) area. 2.1 Installing the battery in the telephone 2.1.1 Installing the battery in the telephone 1.
8262/8262Ex DECT Handset 2.1.2 Removing the battery from the telephone 1. 8262 DECT Handset Unlock the cover. Lift up the cover. Remove the battery from its compartment. You can turn your set over on your hand to extract the battery from its compartment. Be careful not to drop the battery. 2. 8262Ex DECT Handset The battery provided is integrated in the cover and is screwed onto the telephone. Use the screwdriver provided to unscrew the battery. Remove the battery from its compartment.
8262/8262Ex DECT Handset 2.2 Installing the memory card Never install the memory card in an ATEX (potentially explosive atmosphere) area. The handset Micro SD card stores handset configuration data. The Bluetooth settings are not saved on the Micro SD card. If memory is removed, the handset will keep registration but the phone configuration and storage content will revert to what they were before the memory card was inserted.
8262/8262Ex DECT Handset 2.3 Charging your telephone battery Never charge or install the battery in an ATEX (potentially explosive atmosphere) area. 2.3.1 Charging the battery on a dual charger The 8262Ex DECT Handset battery is not compatible with the spare charger. The dual charger is provided for charging the handset and for a spare battery when at a desk. Put your phone on its support. Plug the USB cable into the 5V socket of the desktop charger.
8262/8262Ex DECT Handset 2.3.3 LED Green steady: the phone is on the charger (or connected to the USB cable) and the battery is fully charged. Red steady: the phone is on the charger and the battery is charging. Recharge your telephone battery regularly. The telephone can be on or off when recharging the battery. If the telephone is to remain unused or out of its charger for several weeks, remove the battery and store it separately. The handset battery charging time is around 3 hours.
8262/8262Ex DECT Handset 3 Using your telephone 3.1 Messaging portal The messaging portal allows you to access and manage features such as the call log, text messaging and voice messages. When you have received a new event (new voice message, new text message or new missed call) the message icon is displayed in the status bar. The orange LED on your telephone flashes to indicate that you have a new request. You are alerted by a special tone.
8262/8262Ex DECT Handset Actions available from the messaging portal The actions you can perform when you access the messaging portal depend on the selected tab and the state of the event (new or acknowledged). Use the up-down navigation keys to select the action and press OK. Read: Read the selected event. Ack all: Acknowledge all events of the selected tab as read. Delete all: Delete all events of the selected tab. Sendmsg: Send a voice or text message.
8262/8262Ex DECT Handset 3.2 Making a call Dial. Send the call. You are in communication: Hang up. To make an external call, dial the outside line access code before dialing your contact number. 3.3 Calling from your personal directory or Access MENU. Contacts PersSpDial Validate access to the 'personal directory '. Select the name of the person you wish to call. Send the call. Quick access: 8AL90323ENABed01 (long press).
8262/8262Ex DECT Handset 3.4 Calling your caller by name (company directory) Quick access: or Access MENU. Contacts Directory Enter the first letters of your contact's surname. The search runs as soon as you enter a character (predictive search). The matching names are displayed. If necessary, refine the search by entering the first letters of the first name If necessary, refine the search by entering the beginning of the number Select the desired name. Send the call.
8262/8262Ex DECT Handset 3.5 Receiving a call You are receiving a call. or Answer the call. Disabling the ringer: press the hang up key when your telephone rings: it is still possible to answer by pressing the off hook key. Hang up. Speak. The ringer does not ring if: The vibrate mode is active, the vibrate mode active icon is displayed in the phone notification area. The ringer is disabled, the ringer disabled icon is displayed in the phone notification area. 3.6 Redialing 3.6.
8262/8262Ex DECT Handset 3.8 Call log 3.8.1 Access the call log. Access MENU. Messages Access the messaging portal. Call log Confirm. Enter your password if required and apply. Consulting all calls. x: Missed calls. <: Incoming calls. >: Outgoing calls. Consulting missed calls. 3.8.2 Call back the contact Select the contact to call. All information about the call is displayed. Press ok key to open menu. Call 3.8.3 Delete one call log event Select the contact to delete.
8262/8262Ex DECT Handset 3.8.6 Delete all events from the call log Access MENU. Messages Access the messaging portal. Call log Confirm. Enter your password if required and apply. Delete all 3.9 Callback requests When you receive a callback request, the message icon is displayed on the welcome screen. The orange LED on your telephone flashes to indicate that you have a new request. Display of callback requests. The message icon disappears once all new events have been consulted.
8262/8262Ex DECT Handset To access voice mail functions. You can move horizontally along the various icons. 1 1 2 3 4 5 6 7 2 3 4 5 6 7 Listen to the messages. Delete the current message. Call back the person who left the message. Send a copy of a message. Pause while listening to message. Go back 10 seconds. Go forward 10 seconds. The message icon disappears once all new events have been consulted. 3.
8262/8262Ex DECT Handset Enter your password if required and apply. Read the messages: Select a message to read. Confirm. Readamsg ? Confirm access to the 'read messages' option. From the 'options' menu, you can delete the message, callback the message sender, reply to the message or save the message sender's number in your list of personal contacts. The message icon disappears once all new events have been consulted. 3.
8262/8262Ex DECT Handset The following 27 predefined messages exist: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 CALL ME BACK CALL ME BACK TOMORROW CALL ME BACK AT _:_ (*) CALL BACK _____ (*) CALL THE ATTENDANT CALL THE ASSISTANT I WILL CALL BACK AT _:_ (*) USE PAGING PLEASE FETCH YOUR FAX PLEASE FETCH YOUR MAIL PLEASE CANCEL YOUR FORWARDING VISITORS ARE WAITING YOU ARE EXPECTED AT RECEPTION MEETING AT _:_ (*) 15 16 17 18 19 20 21 22 23 24 25 26 27 (*) MEETING ON ___ (*) MEETING ON ___ AT _:_ (*) OUT FOR A WHILE A
8262/8262Ex DECT Handset 3.13 Send a voice message copy Access MENU. Messages Access the messaging portal. Voicemails Confirm. Enter your password if required and apply. Select the message to copy. Sendcopy Number or name of the recipient or list. Confirm. Confirm. Confirm. To record a comment: Sendcopy Number or name of the recipient or list. Confirm. Reccomment Confirm. Confirm. Start recording. Recording in progress. Stop Confirm.
8262/8262Ex DECT Handset 3.14 Sending a recorded message to a number or a distribution list Access MENU. Messages Access the messaging portal. Voicemail Confirm. Enter your password if required and apply. Sendamsg No. or name of the recipient or the list (000 - 050). Apply. Select the message to be sent. Confirm. Distribution lists: 000: the message is sent to all voice mailboxes. 001 to 050: the message is sent to a group of voice mailboxes.
8262/8262Ex DECT Handset 3.15 During a conversation During a call and without losing the connection, there are several ways to access the options offered by your system, using: The list of icons at the top of the screen. The list of items at the bottom of the screen. 1 1 2 3 4 5 6 7 8 9 10 11 12 8AL90323ENABed01 2 3 4 5 6 7 8 9 10 11 Call in progress. Slot for second call (Call in progress / Call waiting). Contacts. Transfer. Put through a second call. Voice frequency. Conference.
8262/8262Ex DECT Handset 4 During a conversation 4.1 Make a second call You are in conversation with one caller. Use one of the following to make a second call: or or Dial directly the number for your call. Dial the number. Send the call. The first call is on hold. Select your contact in your personal or company directory. Directory Select your contact in your personal or company directory. Send the call. The first call is on hold.
8262/8262Ex DECT Handset 4.2 Recover the call on hold Hang up. Your telephone rings. Recover the call on hold. 4.3 Receiving a second call You are in conversation and a caller is trying to contact you: A beep is sent and the caller's name is displayed for 3 seconds. Answer the second call. The first call is on hold. Over 3 seconds, move with the navigate-left-right key to the receiving a second call icon, to see the identity of the second caller (and off-hook if necessary). 4.
8262/8262Ex DECT Handset 4.6 Three-way conference with internal and/or external callers (conference) During a conversation, a second call is on hold: Conference You are in conference mode. Cancel conference and return to first caller (If conference is active): Conference End the conference with all participants. The conference has ended. 4.7 Placing an outside call on hold (parking) You can park an outside caller in order to take the call on another set. You are holding an external conversation.
8262/8262Ex DECT Handset 4.8 Activate/deactivate voice frequency This feature depends on the system configuration. If necessary, contact your administrator. During a call, you sometimes have to send DTMF signals, for example, for a voice message service, an automatic switchboard or when remotely consulting an answering machine: You are in conversation with one caller. MFcode To activate. Sending DTMF signals. MFcode To deactivate.
8262/8262Ex DECT Handset 5 Keep in touch 5.1 Selecting calls to be forwarded Access MENU. Forward Choose the type of calls to forward (all types of calls, internal or external calls). o Allcalls o Externcalls o Localcalls Confirm. Return to idle. 5.2 Forwarding calls to another number (immediate forward) The number can be your home, mobile, voice mailbox or an internal extension (operator, etc.). Access MENU. Forward Confirm access to immediate diversion.
8262/8262Ex DECT Handset 5.3 Different types of diversions / Example of diversion on busy 5.3.1 Different types of diversions You can initiate different types of forwarding from the call forward list. Access MENU. Forward Select the 'List of diversions' icon. FwdBusy When you are in conversation, all your calls are diverted to the number you choose. FwdDND Your telephone is momentarily inaccessible to all incoming calls. FwdFollow Your calls follow you when you are at another set.
8262/8262Ex DECT Handset 5.4 Diverting calls to your voice mailbox Access MENU. Forward FwdImmVMU Confirm. 5.5 Cancelling all forwards Access MENU. Forward FwdCancel. Confirm. 5.6 Activating/deactivating the personal assistant As well as leaving a message in the voice mailbox, the personal assistant directs the caller to an internal number, an outside number, a mobile or the switchboard. Access MENU.
8262/8262Ex DECT Handset 5.7 Personal assistant: reaching you with one number only Access MENU. Services Persoassist Menu To select the type of forwarding. Menu InternalNb Enter the name of a colleague or your assistant or any other name. ExternalNb Key in an outside number. MobileNb Key in the number of your mobile. ChoiceON / ChoiceOFF Activate/deactivate the transfer to the switchboard. Dial the number. Apply.
8262/8262Ex DECT Handset 6 Programming your telephone 6.1 Initializing your voice mailbox Before starting initialization, make sure the administrator has created a voice mailbox. You can use the Message icon on the welcome screen to initialize your voice mailbox. Access MENU. Messages Confirm access to the voice mailbox. Enter your password and record your name in accordance with the spoken instructions. OR.
8262/8262Ex DECT Handset To go back to the default message. Access MENU. Services Mbxgreeting Apply. Default ? Yes Confirm default message. 6.3 Change your personal password Your personal password is used to access the messaging portal and to lock your telephone. Access MENU. Services Useroptions Password Enter the old password. Enter the new password. Apply. Until your voice mailbox is activated, the default password is defined by the administrator.
8262/8262Ex DECT Handset 6.4 Adjusting the audio functions You can select the ring tone for your telephone (6 choices) and adjust its volume (4 levels). Access MENU. Services Phoneset 6.4.1 Choose the tune Ext. Melody Int. Melody Select the ring tone for internal or external incoming calls. Select the melody of your choice. Apply. 6.4.2 Adjusting the ringer volume Ring.level Select the volume of your choice. Apply. 6.4.
8262/8262Ex DECT Handset 6.5 Activating automatic answer on the headset This mode allows you to answer calls automatically (without doing anything) and to direct the call to the external headset. Access MENU. Services Phoneset automatic answer Select active/inactive as you wish. Apply. 6.6 Adjusting your telephone functions Access MENU. Settings Select the function* you want and use the On/Off softkeys to activate or deactivate the function.
8262/8262Ex DECT Handset Force calendar ring Activate/deactivate an audio signal, regardless of the ringer setting, when you receive an appointment reminder. Economy mode Activate or deactivate the economy mode. When the economy mode is activated, the set adjusts its radio emission power according to the distance between the set and the radio base. The closer the set is to the radio base, the lower is the radio emission from the phone.
8262/8262Ex DECT Handset 6.8 Programming your personal directory Your personal directory can contain up to 10 numbers. Access MENU. Contacts PersSpDial Select the chosen card. Confirm (long press). Enter the name. Apply. Enter the number. Apply. Return to idle. To key in the name: the keys in the keypad include letters that you can display by pressing them successively. Example: press '8' twice to display the letter 'U'.
8262/8262Ex DECT Handset 6.10 Erase a record from the personal directory Access MENU. Contacts PersSpDial Select the record to erase. Confirm (long press). Delete all characters. Apply. Delete all numbers. Apply. Return to idle. 6.11 Programming an appointment reminder Access MENU. Alarms TempAppt: temporary appointment: appointment within the next 24 hours. PermAppt: permanent appointment: daily appointments at the same time.
8262/8262Ex DECT Handset 6.12 Configure the F1 and F2 keys A lock, speed dial, alarm acknowledgment or notification event (if authorized) feature can be associated with the F1 and F2 keys. Once configured these features can be accessed by a short or a long press. 6.12.1 Define the feature to associate with the F key. Access MENU. Settings Keys Set the kind of feature (call or lock feature) you want to associate with each key and key press (short or long). Return to idle. 6.12.
8262/8262Ex DECT Handset 6.13.2 Programming an appointment reminder Access MENU. Access the agenda menu. Add Enter date. Save Enter the beginning time. Save Choose the duration of the appointment. Select Enter the subject of the appointment (this field can be left empty). Save Enter the place of the appointment (this field can be left empty). Save Define when the reminder will be activated before the appointment.
8262/8262Ex DECT Handset 6.13.4 Modify an appointment reminder Access MENU. Access the agenda menu. Select a date (Month view only). View (Month view only). View the agenda for the selected date (Month view only). Select the appointment of the day (in month view) or the appointment of the week (in week view). More Edit Change the appointment by filling in the fields as described in the creation of appointments. 6.13.5 Copying an appointment reminder Access MENU.
8262/8262Ex DECT Handset 6.14 Locking your telephone 6.14.1 Locking features on your terminal This service enables you to prohibit outside calls and any programming changes on your telephone: Access MENU. Lock Personal code (Please refer to the administrator for your password). Apply. Unlocking features on your terminal: Access MENU. Lock Apply. Personal code (Please refer to the administrator for your password). Apply. 6.14.
8262/8262Ex DECT Handset 6.15 Configuring Bluetooth With the 8262EX DECT Handset, use only Bluetooth devices marked with the ATEX logo, usable in an ATEX (potentially explosive atmosphere) area. 6.15.1 Enable/Disable Bluetooth Access MENU. Settings Bluetooth Enable Bluetooth? Yes / No When enabled, the unconnected Bluetooth icon is displayed () and the Led flashes blue slowly. 6.15.2 Pairing Bluetooth devices This feature is used to detect Bluetooth devices and to pair them.
8262/8262Ex DECT Handset 6.15.3 Managing paired devices This option allows you to list and to manage devices paired to the phone (up to 4 compatible devices). Access MENU. Settings Bluetooth Paired devices The paired devices are displayed on the screen. The dotted device is the connected device. When selecting devices, you can connect/disconnect or change name, delete, delete all and see info details via the more menu. 6.
8262/8262Ex DECT Handset 7 Sharing 7.1 Answering the general bell When the operator is absent, incoming external calls are diverted to a general bell. You can answer these calls: Access MENU. Pickup AnsGenBell Confirm. 7.2 Call pick-up You hear a telephone ringing in an office where no-one can answer. If authorised, you can answer the call on your own telephone. Access MENU. Pickup Pick-upInd Enter number of ringing telephone. Apply.
8262/8262Ex DECT Handset 7.3 Hunting groups 7.3.1 Hunting group call: Some phone sets can be associated to form a group. You can contact any one of them by dialling the group number. Belonging to a group does not affect the management of direct calls. A specific telephone within a group can always be called by using its own number. 7.3.2 Temporary exit from your hunting group: Code of the 'Group exit' function. Enter your group number. Confirm. 7.3.
8262/8262Ex DECT Handset 8 Registering the telephone 8.1 Registering the telephone on a system for the first time For the mobile telephone to function, it must be registered on at least one ALE International PBX. If, when first switched on, the display indicates: 'Auto install?' your telephone has not been registered on any system. Access MENU. Settings System settings Enter the PIN Code (The default is 0000). Apply.
8262/8262Ex DECT Handset 8.2 Registering the telephone on other systems The telephone can be registered on several systems (maximum of 4). Note: the input is usually reserved for use with your main ALE International system. You can select the other inputs to register the telephone under another system (ALE International or other system). 8.2.1 To make a new registration, when the telephone has already been registered on one or more systems, proceed as follows: 1.
8262/8262Ex DECT Handset 8.2.2 Selecting your DECT system Your telephone can be programmed to function on 4 different DECT systems. Access MENU. Settings Select System. Select network Select the desired input (the chosen option is indicated by the radio button with a central dot). Return to idle. The selection is retained even after switching the telephone on/off. The selection of a specific system (SYSTEM...) forces operation on a specific system.
8262/8262Ex DECT Handset 9 Live signal and notification management 9.1 Introduction Your handset offers services such as live calls, emergency calls, event keys or status calls and man down, shock, no movement or pull cord alarms. These services must be activated and configured by your administrator. Please contact your administrator before using these services. Only emergency and event calls can be initiated by the user.
8262/8262Ex DECT Handset 9.2 Emergency calls These calls are designed to send alarm signals easily in emergency situations. Typically, emergency situations involve injuries or material damage and have highest priority among all other alarm events and calls. Notification calls are made by pressing the following keys: Press the function key (twice or press and hold) to activate the emergency notification call. OR Long press the OK key to activate the emergency notification call (depends on configuration).
8262/8262Ex DECT Handset 9.4 Embedded alarms: man down, shock, no movement, pull cord alarms A sensor is integrated in your handset. Depending of the configuration, an alarm is triggered in the following situations: Man Down: the handset detects a loss of user verticality, such as by falling to the ground due to an injury, and triggers an alarm to the server.
8262/8262Ex DECT Handset 10 Accessories 10.1 Phone package In order to have a fully operational 8262 DECT Handset, make sure that you have the following items: the battery, the AC/DC adapter, the power supply and the USB cable. Your phone is equipped with a belt clip on the back. 10.2 Dual chargers and power supply Your phone charger is supplied with the following equipment: An AC/DC adapter made of a body and a separate plug head that clips onto the AC/DC adapator body.
8262/8262Ex DECT Handset 10.2.1 How to dock your phone on the desk support The 8262Ex DECT Handset battery is not compatible with the spare charger. The dual charger is provided for charging the handset and for a spare battery when at a desk. Put your phone on its support. Plug the USB cable into the 5V socket of the desktop charger. Plug the other end of the USB cable into the AC/DC adaptor. Plug the AC/DC adaptor into the mains power supply.
8262/8262Ex DECT Handset 10.3 Characteristics of the mains power adapter Input: 100/240 V - 50/60 Hz. Output: 5V - 1A. The mains power socket used must be close to the charger/holder and easily accessible, so that it can be used as an 'on/off' facility. 10.4 Pull cord A pull cord, adjustable length from 60 to 80 cm, can be fixed to the handset. Remove the protected cover (side of the phone). Fix the pull cord in the compartment by pressing strongly.
8262/8262Ex DECT Handset 10.5.3 Battery charge level > 66% 33% - 66% 10% - 33% < 10% 10.6 Headphone / external microphone (not available for the 8262EX DECT Handset) The side of the telephone features a 3.5 mm jack connector for headphone / external microphone. Contact your retailer for information on the various headphone models available. 10.7 Cleaning your telephone Your telephone does not require any particular servicing. However, it may be cleaned using a soft, damp cloth.
8262/8262Ex DECT Handset 11 Declaration of compliance This equipment uses DECT frequency range that depends on country: 1880 - 1900 Mhz in Europe, 1920 1930 MHz in US/Canada, 1910 - 1930 MHz in LATAM, 1910 - 1920 MHz in Brazil. The equivalent isotropically radiated power at the antenna is less than 110 mW or 250 mW (it depends on the country). This equipment offers also Bluetooth® Interface: frequency range 2402-2480 MHz, Radiated Power 1.72 mW.
Quick guide Answer the call. Long press (feature depending on the system): redial last number or access the redial list. Switching between two calls (broker call). Switch on (long press). Switch off (long press). Switch off ringer. Hang up. Return to previous menu. Erase a character. Delete an entire field. Access menu. Access menu. Confirm. Navigate. Access to personal speed dial (down navigation key). In idle or communication mode: access the company directory.
Status icons Quick guide The status icons are displayed on the welcome screen and indicate the status of the telephone. Battery charge level ( > > > ). In charge (flashing icon). New event(s) - callback request, voice mail, text mail, missed call. Indicates a pending calendar notification. Appointment programmed. Call diversion activated. Vibrate mode active. Ringer active. Ringer disabled. Radio reception quality - Normal Mode. Radio reception quality - 50 mW power. Loudspeaker on (in conversation).
