Operation Manual

Keep in touch

Other

6.1

Introduction

Your system offers a wide range of services and features. To activate a feature when you are not in

communication, take the set off the hook and enter the feature code followed by the parameters to associate

to the feature. For information on the features codes list, contact your installer or administrator.

6.2

Immediate forward to a number (Single-line terminal only)

6.3

Forwarding your calls to your voice message service (Single-line terminal only)

6.4

Cancelling all forwards (Single-line terminal only)

You can program a feature on a speed dial key by entering the feature code followed by parameters

associated to the feature. Refer to chapter: Speed dial .

You are not in conversation

Dial the feature code for the forwarding type you want : immediate, busy line, no answer,

etc.

Enter the destination number

When the set is forwarded, you hear a specific tone after hooking off the set.

Code to associate to a speed dial key: Forward + No. of diversion telephone .

You are not in conversation

Dial the feature code for the forwarding type you want : immediate, busy line, no answer,

etc.

Enter the voicemail number

When the set is forwarded, you hear a specific tone after hooking off the set.

Code to associate to a speed dial key: Forward + Voicemail number .

You are not in conversation

Enter the feature code: Forward cancellation

Code to associate to a speed dial key: Forward cancellation .

Forward cancellation.

You can cancel the forward from the handset that the calls are forwarded to (forward cancellation

code) or from another company handset (remote forward cancellation code + number of forwarded

handset).

A diversion can also be cancelled by programming another type of diversion.