User's Manual

Configure an XS-240W-A or XS-250WX-A indoor
ONT
80
7368 ISAM ONT XS-240W-A XS-250WX-A Product
Guide
Edition 01 Issue: 01
2 Enter your username and password in the Log in window, as shown in Figure 26.
The default user name is AdminGPON. The default password for OPID ALCL is ALC#FGU.
Figure 26 Web login window
3 Click Login. The Device Information screen appears.
4 STOP. This procedure is complete.
8.2.2 Device and connection status
XS-240W-A and XS-250WX-A ONTs support the retrieval of a variety of device and
connection information, including:
• device information
• LAN status
• WAN status
Caution — Pressing the Reset button for less than 10 seconds reboots
the ONT; pressing the Reset button for 10 seconds resets the ONT to the
factory defaults, except for the LOID and SLID.
Note — If you forget the current username and password, press the
reset button for 5 s and the default values for the username and password
will be recovered at startup.
Note — To help protect the security of your Internet connection, the
application displays a pop-up reminder to change both the Wi-Fi
password and the ONT password.
To increase password security, use a minimum of 10 characters,
consisting of a mix of numbers and upper and lower case letters.
R05.06.00 | March 2017 | 3FE 46861 AAAA TCZZA | Edition 01